Skip to main content
Access IndiaPLATFORM
HomeHSNChapter 87HSN 8712 00 90

Other

Non-motorised cycles, tricycles, cargo cycles and tandem cycles

BIS QCO APPLICABLE · ISI MARK SCHEME · IS 10613

HSN 8712 00 90 (non-motorised cycles including tricycles, cargo cycles and tandem cycles) is covered by a Bureau of Indian Standards Quality Control Order. Retro-reflective devices fitted to these cycles must conform to IS/ISO 6742-2:2015 under the ISI Mark Scheme (Scheme-I) and to clause 4.14 of IS 10613:2014 under a Certificate of Conformity (Scheme-IV), with effect from 01 July 2023, by virtue of the Bicycles — Retro Reflective Devices (Quality Control) Order, 2023. No separate customs-clearance overlay applies to this tariff line.

What this is
HSN code
8712 00 90
Chapter
87 · Vehicles other than railway or tramway rolling-stock; parts and accessories
BIS QCO
Applicable · ISI Mark Scheme · CM/L required
Indian Standard
IS 10613 · effective 23-02-2023
Applicable Partner Government Agencies
BISBIS·Bureau of Indian Standards
Compliance steps
  1. 1
    Verify that the supplier of retro-reflective devices holds a current Bureau of Indian Standards CM/L licence against IS/ISO 6742-2:2015 (Table 1 goods) on the BIS online register. Confirm the licensed product scope and manufacturing facility address before placing the purchase order.
    Bicycles — Retro Reflective Devices (Quality Control) Order, 2023 · S.O. 882(E) dated 23-02-2023 · Scheme-I of Schedule-II of the BIS (Conformity Assessment) Regulations, 2018
  2. 2
    For retro-reflective devices supplied as bicycle safety components (Table 2 goods), obtain a Bureau of Indian Standards Certificate of Conformity certifying compliance with the essential requirements under clause 4.14 of IS 10613:2014. This is Scheme-IV, not Scheme-I — a CM/L is not a substitute.
    Bicycles — Retro Reflective Devices (Quality Control) Order, 2023 · S.O. 882(E) dated 23-02-2023 · Scheme-IV of Schedule-II of the BIS (Conformity Assessment) Regulations, 2018
  3. 3
    Ensure all Table 1 retro-reflective devices bear the ISI mark and the supplier's CM/L number on the product itself, not only on packaging. Table 2 components must be accompanied by the corresponding Certificate of Conformity documentation at shipment level.
    Scheme-I and Scheme-IV of Schedule-II of the BIS (Conformity Assessment) Regulations, 2018 · Bicycles — Retro Reflective Devices (Quality Control) Order, 2023
  4. 4
    Quote the supplier's BIS CM/L number (for Table 1 goods) or Certificate of Conformity reference (for Table 2 goods) on the bill of entry. Customs verifies each against the BIS register; an absent, expired, or scope-mismatched credential triggers consignment detention.
    S.O. 882(E) dated 23-02-2023 · BIS Act, 2016 · Customs Act, 1962
A word of counsel

The single most common error on this tariff line is treating the QCO as a single-scheme obligation and obtaining only a CM/L under Scheme-I. The Bicycles — Retro Reflective Devices (Quality Control) Order, 2023 operates on two parallel tracks: Table 1 goods (lighting and retro-reflecting devices) require an ISI-marked CM/L under Scheme-I of IS/ISO 6742-2:2015, while Table 2 goods (retro-reflective safety requirements for bicycles) require a Certificate of Conformity under Scheme-IV against clause 4.14 of IS 10613:2014. Presenting only the CM/L for a Table 2 component — or vice versa — results in detention regardless of the document's validity.

Need a regulatory steer on this product?
Speak to a regulatory counsel about your specific HSN, IS, and supplier situation.
Speak to an Expert
Frequently asked
Does HSN 8712 00 90 require BIS certification?
Yes. Retro-reflective devices for cycles imported under this tariff line are subject to the Bicycles — Retro Reflective Devices (Quality Control) Order, 2023 (S.O. 882(E)), mandating conformity to IS/ISO 6742-2:2015 under the ISI Mark Scheme and to IS 10613:2014 clause 4.14 under a Certificate of Conformity, with effect from 01 July 2023.
What is the difference between Scheme-I and Scheme-IV certification under this QCO?
Scheme-I requires an ISI-marked CM/L licence from the manufacturer for Table 1 lighting and retro-reflecting devices against IS/ISO 6742-2:2015. Scheme-IV requires a Certificate of Conformity for Table 2 bicycle safety retro-reflective components against the essential requirements of clause 4.14 of IS 10613:2014.
Does the QCO cover the entire cycle or only the retro-reflective devices?
The Bicycles — Retro Reflective Devices (Quality Control) Order, 2023 specifically covers retro-reflective devices and their safety requirements as listed in Table 1 and Table 2 of that order; it does not extend to all structural or mechanical components of the cycle.
Is a single CM/L licence sufficient to cover all retro-reflective device variants from one manufacturer?
No. The CM/L is scope-specific to the licensed product range and manufacturing facility; device variants or facilities outside the licensed scope are not covered, and a separate Certificate of Conformity under Scheme-IV is required for Table 2 components.
Last verified against gazette notifications: 2026-05-16. Source: BIS / Indian Customs CUSDATA.
Related